- Appel API
Contributions humaines
Réalisées par des traducteurs professionnels, des entreprises, des pages web ou traductions disponibles gratuitement.
Espagnol
Anglais
Infos
Espagnol
taco bell
Anglais
taco bell
Dernière mise à jour : 2010-10-22
Fréquence d'utilisation : 1
Qualité :
Référence: Wikipedia
Espagnol
yo quiero taco bell
Anglais
i want taco bell
Dernière mise à jour : 2017-05-29
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
cinco días de acción contra taco bell.
Anglais
five days of spooky action on taco bell.
Dernière mise à jour : 2018-02-13
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
taco-bell ha dejado de usar tocino en su cocina.
Anglais
taco-bell do not use lard anymore in their cooking.
Dernière mise à jour : 2018-02-13
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
en 2008, novek apareció en una comercial de televisión nacional para taco bell y en otro para optimum online.
Anglais
in 2008, novek appeared in a national television commercial for taco bell and another for optimum online.
Dernière mise à jour : 2024-02-18
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
ella sacó de la cuenta de $5-dollar su monedero. “mayo le doy $5,” ella pidió.
Anglais
she pulled the $5-dollar bill out of her purse. “may i give you $5,” she asked.
Dernière mise à jour : 2018-02-13
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
=== taco bell skill challenge ===* n. 1 - john wall fue reemplazado por patrick beverley.
Anglais
===skills challenge===:b. john wall was replaced by patrick beverley.
Dernière mise à jour : 2016-03-03
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
taco bell vendió 100 millones de sus nuevos doritos locos tacos en 10 semanas: el lanzamiento más exitoso de cualquier producto de la marca.
Anglais
taco bell sold 100 million of its new doritos locos tacos in 10 weeks, making it the chain’s fastest ever product launch.
Dernière mise à jour : 2018-02-13
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
dougherty señala que la convulsión social que tuvo lugar entre old spice y taco bell es bastante inútil en el sentido de crear una historia en la marca como las normas de la wwe no son apropiados para la comercialización de las marcas.
Anglais
dougherty points out that the social upheaval that took place between old spice and taco bell is considerably useless in the sense of creating a brand story - as wwe standards are not appropriate for the marketing of brands.
Dernière mise à jour : 2018-02-13
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
ella alcanzó en su monedero y encontró una cuenta de $10-dollar, una cuenta de $5-dollar, y cuatro o cinco cuartos.
Anglais
she reached into her purse and found a $10-dollar bill, a $5-dollar bill, and four or five quarters.
Dernière mise à jour : 2018-02-13
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
taco bell: viva young. (nosotros somo jovenes) me enteré hace poco que las personas de edad avanzada me hicieron reír una cantidad excesiva.
Anglais
all of this is the opposite of #ughhh. taco bell: viva young. i found out recently that old people swearing made me laugh an inordinate amount.
Dernière mise à jour : 2018-02-13
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
la informacion sobre los precios que publicamos en esta pagina es de las casas que pagan impuestos para ser rentadas a turistas extranjeros,usted quizas pueda encontrar casas 5 dollares mas baratas pero que alquilan ilegalmente.
Anglais
the information we supply bellow is based on our houses database and on the houses that are legally authorized for being rented to foreign tourists, you can find probably $5 usd cheaper prices but in houses that rent illegally, we strongly recommend not to stay in houses that are not authorized by onat. anyway for 5 dollars a day less you can get into serious problems.
Dernière mise à jour : 2018-02-13
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Espagnol
introductionintroductionthe aim of this tutorial is to take you through the process of entering a circuit of modest complexity in order to familiarise you with the techniques required to drive the schematic capture module in proteus (isis). the tutorial starts with the easiest topics such as placing and wiring up components, and then moves on to make use of the more sophisticated editing facilities, such as creating new library parts. an accompanying tutorial in the pcb module (ares) then continues the project development using the completed schematic drawn in this tutorial. for those who want to see something quickly, dspic33_rec_schematic.pdsprj contains the completed tutorial circuit but no layout while dspic33_rec_unrouted.pdsprj and dspic33_rec_complete.pdsprj both contain a completed schematic and a pcb. all of these projects can be loaded from the open sample command on the proteus 8 home page under the tutorials category. note that throughout this tutorial (and the documentation as a whole) reference is made to keyboard shortcuts as a method of executing specific commands. the shortcuts specified are the default or system keyboard accelerators as provided when the software is shipped to you. please be aware that if you have configured your own keyboard accelerators the shortcuts mentioned may not be valid. information on configuring your own keyboard shortcuts can be found in the general concepts section of the documentation. see also:pcb layout (tutorial)schematic capture (reference manual)creating a new projectwe shall assume at this point that you have installed the proteus 8 software package.to start the software, click on the start button and select programs, proteus 8 professional and then the proteus 8 application. the main application will then load and run and you will be presented with the proteus home page.if you have a demonstration copy of the software you can start the proteus application via the proteus 8 demonstration tab from the start menu.in order to create a schematic we must first create a project. since this tutorial is partnered with the pcb tutorial we will create a project for schematic/pcb. see also :new project for vsm simulation (vsm tutorial).start by pressing the new project button near the top of the home page in proteus.on the first page of the wizard specify a name and path for the project.we need a schematic so check the box at the top of the next step and then choose the default template.similarly, we need a layout so check the box at the top of the layout page and again choose the default template.we are not simulating the design so leave the firmware page blank and continue on to the summary which should look like the following:click on the finish button to create the projectfurther reading:a schematic template can contain sheet size, colour scheme, company logo, header block and various other aesthetic presets. further information can be found in the templates chapter of the reference manual.a pcb template can contain board edge, mounting holes, design rules, layer stack and various other technology information. refer to the templates chapter in the pcb documentation for more information.the project will open with two tabs, one schematic capture and the other for pcb layout. click on the schematic tab to bring the isis module to the foreground.guided tourthe largest area of the screen is called the editing window, and it acts as a window on the drawing - this is where you will place and wire-up components. the smaller area at the top left of the screen is called the overview window. in normal use the overview window displays, as its name suggests, an overview of the entire drawing - the blue box shows the edge of the current sheet and the green box the area of the sheet currently displayed in the editing window. however, when a new object is selected from the object selector the overview window is used to preview the selected object - this is discussed later. isis schematic capture windowif you don’t like the default layout of the toolbars you can pick them up and dock them on any of the four sides of the application. similarly you can move the object selector & overview window pane across to the right hand side of the application by dragging the end of it all the way across to the other side.toolbars and menu options will switch according to which tab is active (at the front). throughout this tutorial when we refer to an icon or a menu command we are assuming that the schematic tab is active.right clicking the mouse either in the object selector or in the overview window will provide a context menu, including the option to ‘auto hide’ the left hand pane. this is extremely useful if you want to maximise the editing area of the application. when enabled the object selector and overview window will be minimised to a ‘flyout bar’ at the left (or right) of the application by default and will appear either when the mouse is placed over the bar or when the mode of operation is changed by selecting a different icon.auto hide the object selector device mode iconsee also:screen layout (reference manual)navigation of the view displayed in the editing window takes two forms; adjusting the scale of the drawing (zooming) and adjusting the area of the drawing displayed (panning). these techniques are somewhat intertwined and are discussed in more detail below:zoomingthere are several ways to zoom in and out of areas of the schematic :point the mouse where you want to zoom in and out of and roll the middle mouse button (roll forwards to zoom in and backwards to zoom out). point the mouse where you want to zoom in or out of and and press the f6 or f7 keys respectively. hold the shift key down and drag out a box with the left mouse button around the area you want to zoom in to. we call this shift zoom use the zoom in, zoom out, zoom all or zoom area icons on the toolbar. zoom iconsthe f8 key can be used at any time to display the whole drawing.the shift zoom and the middle mouse zoom techniques can also be used over the overview window. that is, you can position the mouse over the overview window and either roll the middle mouse button or use shift zoom to navigate in or out of an area of the schematic.panningas with zooming, there are a number of options for panning across the editing window.click on the middle mouse button to enter track pan mode. this puts isis is a mode where the entire sheet is picked up and will move as you move the mouse. the track pan cursor will indicate when you have entered this mode. left click the mouse again to exit track pan mode. to simply 'pan' the editing window up, down, left or right, position the mouse pointer over the desired part of the editing window and press the f5 key. hold the shift key down and bump the mouse against the edges of the editing window to pan up, down, left or right. we call this shift pan. should you want to move the editing window to a completely different part of the drawing, the quickest method is to simply point at the centre of the new area on the overview window and click left. use the pan icon on the toolbar note that when using the track pan method above you can also zoom in and out by rolling the mouse wheel. so, click the middle mouse button to pick up the sheet and move the sheet by moving the mouse and zoom the sheet by rolling the middle mouse button. left click to 'drop' the sheet and exit track pan mode.it is well worth spending a few moments familiarising yourself with navigation in isis - it is after all one of the most common operations you will perform. in particular, learning to use the middle mouse button both for track pan and for zooming will save you time during schematic design.a grid of dots or lines can be displayed in the editing window as a visual aid using the grid command on the view menu, or by pressing 'g' to toggle the grid from ‘dots’, ‘lines’ or ‘off, or by clicking the grid icon on the toolbar. the grid helps in lining up components and wires and is less intimidating than a blank screen. if you find it hard to see the grid dots or lines, either adjust the contrast on your monitor slightly (by default the grid is displayed in light grey) or change their colour with the set design defaults on the template menu.below the overview window is the object selector (sometimes known as a 'parts bin') which you use to select devices, symbols and other library objects. we'll familiarise ourselves further with using the object selector later.finally, at the bottom of the screen is the co-ordinate display, which reads out the co-ordinates of the mouse pointer when appropriate. these co-ordinates are in 1 thou units and the origin is in the centre of the drawingorigin co-ordinatesnote that isis allows you to reposition all the icon toolbars as well as move/resize the object selector/overview window. do be aware however, that this documentation refers to all the rebars and windows in their default locations.visual aids to designisis is designed to be as user friendly as possible and provides two main ways to help you see what is happening during the design process – objects are encircled with a dashed line or ‘twitched’ when the mouse is over them and mouse cursors will change according to function. essentially, the object-twitching scheme tells you which object the mouse is over (the ‘hot’ object) and the mouse cursor tells you what will happen when you left click the mouse on that object. while extremely intuitive, a summary of cursors used, together with their actions, is provided below:cursor description standard cursor - used in selection mode when not over a 'hot' object. placement cursor - placement of an object will commence on a left click of the mouse. hot placement cursor - appears green when placement of a wire is available on left click of the mouse. bus placement cursor - appears blue when placement of a bus is available on left click of the mouse. selection cursor - object under the mouse will be selected on a left click of the mouse. move cursor - the currently selected object can be moved. drag cursor - the wire or 2d graphic can be dragged by holding the left mouse button down. assignment cursor - when over an object (having set the property assignment tool) you can assign the property by left clicking the mouse button. we will see more of the different cursor types throughout the course of the tutorial.keyboard shortcutsfor those customers who prefer to invoke commands and dialogues via the keyboard proteus provides a comprehensive and flexible scheme for assigning shortcuts. the dialogue form is invoked from the system menu – set keyboard mapping command, where all commands and operation modes can be accessed from the combo box at the top. simply select the command you want, apply a key sequence and assign it to that commandkeyboard mapping dialogue formwhile there are few limits on shortcuts, a few standard windows accelerators are restricted as they are global across the entire proteus system (e.g. ctrl+s for save).see also:keyboard configuration (reference manual)display optionsisis is capable of harnessing the power of your computers graphics card to speed up operation and present a crisp and smooth display. however, as not all machines have sufficient graphics cards the software is also capable of using windows to perform display and graphical operations. the available modes of operation are called:windows gdi mode. opengl hardware accelerated mode. direct 2d hardware accelerated mode. if your graphics card is not powerful enough to support hardware acceleration then isis will simply default to windows gdi mode. should your computers graphics card be capable of both direct2d and opengl the system will default to direct2d mode as this tends to be more reliably implemented by graphics card vendors.configuration of the screen display takes place from the set display options on the system menu. some of these options are specific to a particular hardware acceleration technology and will be disabled when a different mode is enabled.the set display options form for opengl and direct2dthe first section of the dialogue reports on whether your graphics card will support opengl and/or direct2d hardware acceleration and, if so, allows you to switch between graphics mode. the auto-pan section of the dialogue allows you to control distance, smoothness and speed of pan operations on the schematic. for example, holding down the shift key and bumping the mouse against the edge of the window will auto-pan the screen.the highlight animation options allow you to specify the speed at which objects become active when the mouse is moved over them. the attack rate is the rate at which the object is highlighted and the release rate is the speed at which the object returns to it’s default state. these options are only available in hardware accelerated display modes.finally, the multi-sampling combo box allows you to specify the level of anti-aliasing you want when working in opengl mode. the higher the level of multi-sampling the better the anti-aliasing effect but the more gpu resources are consumed. if you select a level of multi-sampling which is not supported by your graphics hardware the software will reset the level to the closest one which your card can handle. what you get with multi-sampling varies enormously between graphics cards. some present extremely smooth text, while with others it looks blurry and on a few it causes display issues. we would suggest you being with multi-sampling off if you choose to work in opengl mode.configuration of colours and styles in isis takes place from the template menu. this allows to change everything from paper, grid and highlight colours to the thickness and colour of all the object types used in a design. please refer to the reference manual section on templates for more information.
Anglais
tradukkaintroductionintroductionthe aim of this tutorial is to take you through the process of entering a circuit of modest complexity in order to familiarise you with the techniques required to drive the schematic capture module in proteus (isis). the tutorial starts with the easiest topics such as placing and wiring up components, and then moves on to make use of the more sophisticated editing facilities, such as creating new library parts. an accompanying tutorial in the pcb module (ares) then continues the project development using the completed schematic drawn in this tutorial. for those who want to see something quickly, dspic33_rec_schematic.pdsprj contains the completed tutorial circuit but no layout while dspic33_rec_unrouted.pdsprj and dspic33_rec_complete.pdsprj both contain a completed schematic and a pcb. all of these projects can be loaded from the open sample command on the proteus 8 home page under the tutorials category. note that throughout this tutorial (and the documentation as a whole) reference is made to keyboard shortcuts as a method of executing specific commands. the shortcuts specified are the default or system keyboard accelerators as provided when the software is shipped to you. please be aware that if you have configured your own keyboard accelerators the shortcuts mentioned may not be valid. information on configuring your own keyboard shortcuts can be found in the general concepts section of the documentation. see also:pcb layout (tutorial)schematic capture (reference manual)creating a new projectwe shall assume at this point that you have installed the proteus 8 software package.to start the software, click on the start button and select programs, proteus 8 professional and then the proteus 8 application. the main application will then load and run and you will be presented with the proteus home page.if you have a demonstration copy of the software you can start the proteus application via the proteus 8 demonstration tab from the start menu.in order to create a schematic we must first create a project. since this tutorial is partnered with the pcb tutorial we will create a project for schematic/pcb. see also :new project for vsm simulation (vsm tutorial).start by pressing the new project button near the top of the home page in proteus.on the first page of the wizard specify a name and path for the project.we need a schematic so check the box at the top of the next step and then choose the default template.similarly, we need a layout so check the box at the top of the layout page and again choose the default template.we are not simulating the design so leave the firmware page blank and continue on to the summary which should look like the following:click on the finish button to create the projectfurther reading:a schematic template can contain sheet size, colour scheme, company logo, header block and various other aesthetic presets. further information can be found in the templates chapter of the reference manual.a pcb template can contain board edge, mounting holes, design rules, layer stack and various other technology information. refer to the templates chapter in the pcb documentation for more information.the project will open with two tabs, one schematic capture and the other for pcb layout. click on the schematic tab to bring the isis module to the foreground.guided tourthe largest area of the screen is called the editing window, and it acts as a window on the drawing - this is where you will place and wire-up components. the smaller area at the top left of the screen is called the overview window. in normal use the overview window displays, as its name suggests, an overview of the entire drawing - the blue box shows the edge of the current sheet and the green box the area of the sheet currently displayed in the editing window. however, when a new object is selected from the object selector the overview window is used to preview the selected object - this is discussed later. isis schematic capture windowif you don’t like the default layout of the toolbars you can pick them up and dock them on any of the four sides of the application. similarly you can move the object selector & overview window pane across to the right hand side of the application by dragging the end of it all the way across to the other side.toolbars and menu options will switch according to which tab is active (at the front). throughout this tutorial when we refer to an icon or a menu command we are assuming that the schematic tab is active.right clicking the mouse either in the object selector or in the overview window will provide a context menu, including the option to ‘auto hide’ the left hand pane. this is extremely useful if you want to maximise the editing area of the application. when enabled the object selector and overview window will be minimised to a ‘flyout bar’ at the left (or right) of the application by default and will appear either when the mouse is placed over the bar or when the mode of operation is changed by selecting a different icon.auto hide the object selector device mode iconsee also:screen layout (reference manual)navigation of the view displayed in the editing window takes two forms; adjusting the scale of the drawing (zooming) and adjusting the area of the drawing displayed (panning). these techniques are somewhat intertwined and are discussed in more detail below:zoomingthere are several ways to zoom in and out of areas of the schematic :point the mouse where you want to zoom in and out of and roll the middle mouse button (roll forwards to zoom in and backwards to zoom out). point the mouse where you want to zoom in or out of and and press the f6 or f7 keys respectively. hold the shift key down and drag out a box with the left mouse button around the area you want to zoom in to. we call this shift zoom use the zoom in, zoom out, zoom all or zoom area icons on the toolbar. zoom iconsthe f8 key can be used at any time to display the whole drawing.the shift zoom and the middle mouse zoom techniques can also be used over the overview window. that is, you can position the mouse over the overview window and either roll the middle mouse button or use shift zoom to navigate in or out of an area of the schematic.panningas with zooming, there are a number of options for panning across the editing window.click on the middle mouse button to enter track pan mode. this puts isis is a mode where the entire sheet is picked up and will move as you move the mouse. the track pan cursor will indicate when you have entered this mode. left click the mouse again to exit track pan mode. to simply 'pan' the editing window up, down, left or right, position the mouse pointer over the desired part of the editing window and press the f5 key. hold the shift key down and bump the mouse against the edges of the editing window to pan up, down, left or right. we call this shift pan. should you want to move the editing window to a completely different part of the drawing, the quickest method is to simply point at the centre of the new area on the overview window and click left. use the pan icon on the toolbar note that when using the track pan method above you can also zoom in and out by rolling the mouse wheel. so, click the middle mouse button to pick up the sheet and move the sheet by moving the mouse and zoom the sheet by rolling the middle mouse button. left click to 'drop' the sheet and exit track pan mode.it is well worth spending a few moments familiarising yourself with navigation in isis - it is after all one of the most common operations you will perform. in particular, learning to use the middle mouse button both for track pan and for zooming will save you time during schematic design.a grid of dots or lines can be displayed in the editing window as a visual aid using the grid command on the view menu, or by pressing 'g' to toggle the grid from ‘dots’, ‘lines’ or ‘off, or by clicking the grid icon on the toolbar. the grid helps in lining up components and wires and is less intimidating than a blank screen. if you find it hard to see the grid dots or lines, either adjust the contrast on your monitor slightly (by default the grid is displayed in light grey) or change their colour with the set design defaults on the template menu.below the overview window is the object selector (sometimes known as a 'parts bin') which you use to select devices, symbols and other library objects. we'll familiarise ourselves further with using the object selector later.finally, at the bottom of the screen is the co-ordinate display, which reads out the co-ordinates of the mouse pointer when appropriate. these co-ordinates are in 1 thou units and the origin is in the centre of the drawingorigin co-ordinatesnote that isis allows you to reposition all the icon toolbars as well as move/resize the object selector/overview window. do be aware however, that this documentation refers to all the rebars and windows in their default locations.visual aids to designisis is designed to be as user friendly as possible and provides two main ways to help you see what is happening during the design process – objects are encircled with a dashed line or ‘twitched’ when the mouse is over them and mouse cursors will change according to function. essentially, the object-twitching scheme tells you which object the mouse is over (the ‘hot’ object) and the mouse cursor tells you what will happen when you left click the mouse on that object. while extremely intuitive, a summary of cursors used, together with their actions, is provided below:cursor description standard cursor - used in selection mode when not over a 'hot' object. placement cursor - placement of an object will commence on a left click of the mouse. hot placement cursor - appears green when placement of a wire is available on left click of the mouse. bus placement cursor - appears blue when placement of a bus is available on left click of the mouse. selection cursor - object under the mouse will be selected on a left click of the mouse. move cursor - the currently selected object can be moved. drag cursor - the wire or 2d graphic can be dragged by holding the left mouse button down. assignment cursor - when over an object (having set the property assignment tool) you can assign the property by left clicking the mouse button. we will see more of the different cursor types throughout the course of the tutorial.keyboard shortcutsfor those customers who prefer to invoke commands and dialogues via the keyboard proteus provides a comprehensive and flexible scheme for assigning shortcuts. the dialogue form is invoked from the system menu – set keyboard mapping command, where all commands and operation modes can be accessed from the combo box at the top. simply select the command you want, apply a key sequence and assign it to that commandkeyboard mapping dialogue formwhile there are few limits on shortcuts, a few standard windows accelerators are restricted as they are global across the entire proteus system (e.g. ctrl+s for save).see also:keyboard configuration (reference manual)display optionsisis is capable of harnessing the power of your computers graphics card to speed up operation and present a crisp and smooth display. however, as not all machines have sufficient graphics cards the software is also capable of using windows to perform display and graphical operations. the available modes of operation are called:windows gdi mode. opengl hardware accelerated mode. direct 2d hardware accelerated mode. if your graphics card is not powerful enough to support hardware acceleration then isis will simply default to windows gdi mode. should your computers graphics card be capable of both direct2d and opengl the system will default to direct2d mode as this tends to be more reliably implemented by graphics card vendors.configuration of the screen display takes place from the set display options on the system menu. some of these options are specific to a particular hardware acceleration technology and will be disabled when a different mode is enabled.the set display options form for opengl and direct2dthe first section of the dialogue reports on whether your graphics card will support opengl and/or direct2d hardware acceleration and, if so, allows you to switch between graphics mode. the auto-pan section of the dialogue allows you to control distance, smoothness and speed of pan operations on the schematic. for example, holding down the shift key and bumping the mouse against the edge of the window will auto-pan the screen.the highlight animation options allow you to specify the speed at which objects become active when the mouse is moved over them. the attack rate is the rate at which the object is highlighted and the release rate is the speed at which the object returns to it’s default state. these options are only available in hardware accelerated display modes.finally, the multi-sampling combo box allows you to specify the level of anti-aliasing you want when working in opengl mode. the higher the level of multi-sampling the better the anti-aliasing effect but the more gpu resources are consumed. if you select a level of multi-sampling which is not supported by your graphics hardware the software will reset the level to the closest one which your card can handle. what you get with multi-sampling varies enormously between graphics cards. some present extremely smooth text, while with others it looks blurry and on a few it causes display issues. we would suggest you being with multi-sampling off if you choose to work in opengl mode.configuration of colours and styles in isis takes place from the template menu. this allows to change everything from paper, grid and highlight colours to the thickness and colour of all the object types used in a design. please refer to the reference manual section on templates for more information.
Dernière mise à jour : 2015-06-16
Fréquence d'utilisation : 1
Qualité :
Référence: Anonyme
Avertissem*nt : un formatage HTML invisible est présent
Obtenez une traduction de meilleure qualité grâce aux
7,902,099,611 contributions humaines
Les utilisateurs demandent maintenant de l'aide :
10,4(Néerlandais>Anglais)may punit and damit(Tagalog>Anglais)kepatuhan(Malais>Bosniaque)nueces de maranon(Espagnol>Anglais)disambut oleh rakyat malaysia(Malais>Anglais)baby shower decorations(Espagnol>Anglais)refinanzierungsvolumens(Allemand>Polonais)filoncino ferrarese(Italien>Anglais)ndiyabulela kuwe baba(Xhosa>Anglais)amikor kiállítja a számlát(Hongrois>Anglais)luft(Allemand>Birman)unguentum(Latin>Serbe)iche(Anglais>Portugais)فیلم سکسی خارجی مادر پسر(Zoulou>Anglais)moments with you its win i wish i could stop time(Anglais>Hindi)way mag laag(Cébouano>Tagalog)matter on you(Anglais>Chinois (simplifié))šifarnik(Serbe>Bulgare)turog kan(Danois>Tagalog)my pyortaia(Espagnol>Anglais)
Nous utilisons des cookies pour améliorer votre expérience utilisateur sur notre site. En poursuivant votre navigation, vous déclarez accepter leur utilisation. En savoir plus. OK